Guide to Shop Aluminum Foil Bag for Food Packaging in Maixin
aluminum foil bag for food packaging is famous for its high quality in the market and we, Zhongshan Maixin Packing Technology, Ltd is the most professional manufacturer of this product. Aware of the importance of quality and performance, we implement strict quality control and use qualified raw materials from international prestigious vendors. We take efforts to overcome some design deficiencies. We guarantee this product with the best quality.
Maixin Packaging plays an important role in the global market. Since its establishment, our branded products bring significant influence on the market. Our products are of great value for customers and they are far superior to competitors in terms of performance and quality. The result is that our products have brought considerable profit margins to customers.
We enhance our service level by constantly improving the knowledge, skills, attitudes and behavior of our existing and new staff. We achieve these through better systems of recruitment, training, development, and motivation. Thus, our staff is well-trained in handling queries and complaints at Maixin. They have considerable expertise in product knowledge and the operations of internal systems.
no data
1. Meaning
After the food is packaged, in order to save space and facilitate transportation, it is generally stored and transported in the form of stacking. In this way, the finished food packaging under the stacking will be under the pressure brought by the upper food packaging. If the pressure resistance of the packaging is poor, it is easy to break the bag. Therefore, it is required that the packaging bag body and sealing parts should have high pressure resistance. Inflatable packaging is a common form of food packaging, which can protect the food inside the packaging from deformation and breakage. For nitrogen filled packaging, it can also make the food in a low oxygen environment and prevent the food from oxidative deterioration and mildew. However, the gas filled in the packaging is a double (separator) sword, which can protect the food at the same time, When squeezed or collided by external force, it will have a greater impact on the packaging bag, which requires the packaging bag to have higher flexibility and sealing fastness. Therefore, strengthening the test of pressure resistance of inflatable packaging can effectively reduce the bag breaking rate of packaging in the process of stacking and transportation.
Figure 1 common inflatable food packaging2. Test sampleThe test sample used in this test is the finished package of potato chips of a brand in the form of inflatable packaging.
3. Test basisThe test process is based on the relevant provisions on the pressure resistance of bags in GB / T 10004-2008 plastic composite films for packaging, dry compounding and extrusion compounding.4. Test equipment
In this paper, i-boxtek 1700 carton compression tester is used to test the pressure resistance of the sample. The equipment is independently developed and produced by Jinan Languang Electromechanical Technology Co., Ltd.4.1 test principleBy simulating the extrusion of the test sample stacking, apply a certain pressure on the sample, and test the deformation and leakage of the sample after it is maintained for a certain time under the applied pressure. In addition, the pressure value to be applied to the test sample can be set for many times by testing Zui large crushing force. Each setting is increased on the basis of the last force value. After reaching the predetermined number of times, the compressive capacity of the test sample such as the total deformation of the test sample can be tested.
4.2 equipment parametersThe test range of the equipment is 9kn; The test accuracy is better than level 1, which effectively ensures the accuracy of test data; Three test speeds can be freely set by users, namely 5 mm / min, 10 mm / min and 12.7 mm / min; The deformation resolution is 0.1mm; It has Zui large crushing force, stacking a and stacking B for users to choose freely; Intelligent design such as overload protection, limit travel protection and automatic fault alarm provides users with a safe operating environment; The miniaturization and structure integration design can meet the test requirements of various occasions.4.3 scope of application
(1) The equipment is applicable to the pressure resistance, deformation and stacking test of high-capacity liquid packaging, corrugated carton, honeycomb carton and other packaging, and judge whether the compression resistance of carton is qualified. At the same time, the compression test of plastic cups, plastic barrels (edible oil and mineral water), paper barrels, paper cans, container barrels (IBC barrels), hollow containers, etc.(2) The equipment meets a number of national and international standards, such as ASTM d642, ASTM d4169, TAPPI t804, ISO 12048, JIS z0212, GB / T 16491, GB / T 4857.4, QB / T 1048, etc.5. Test process
(1) Randomly select 5 finished product packaging samples with intact packaging.(2) Set test pressure, test speed, test time and other parameters.(3) Take one of the samples and put it between the two test plates of the equipment. Click the test option to start the test. After the test, the equipment displays the deformation of the sample.
(4) Put the other four samples between two test plates for test.6. Test resultsThe deformation of the five samples tested in this test under the pressure of 200 N for 1 min was 0.1 mm, 0.2 mm, 0.1 mm, 0.1 mm and 0.3 mm respectively. No air leakage or bag breakage occurred by visual inspection.
7. ConclusionPressure resistance is an important performance of inflatable food packaging. In this paper, i-boxtek 1700 carton pressure tester is used to detect the deformation of a brand of potato chips after the finished packaging is maintained under a certain pressure for a certain time, and visually detect the leakage and bag breakage of the sample. The test process is simple, the equipment is easy to operate and the test precision is high. To quantify the sealing performance of the sample after pressure test, put the sample after pressure test into mfy-01 sealing tester for test.
After the food is packaged, in order to save space and facilitate transportation, it is generally stored and transported in the form of stacking. In this way, the finished food packaging under the stacking will be under the pressure brought by the upper food packaging. If the pressure resistance of the packaging is poor, it is easy to break the bag. Therefore, it is required that the packaging bag body and sealing parts should have high pressure resistance. Inflatable packaging is a common form of food packaging, which can protect the food inside the packaging from deformation and breakage. For nitrogen filled packaging, it can also make the food in a low oxygen environment and prevent the food from oxidative deterioration and mildew. However, the gas filled in the packaging is a double (separator) sword, which can protect the food at the same time, When squeezed or collided by external force, it will have a greater impact on the packaging bag, which requires the packaging bag to have higher flexibility and sealing fastness. Therefore, strengthening the test of pressure resistance of inflatable packaging can effectively reduce the bag breaking rate of packaging in the process of stacking and transportation.
Figure 1 common inflatable food packaging2. Test sampleThe test sample used in this test is the finished package of potato chips of a brand in the form of inflatable packaging.
3. Test basisThe test process is based on the relevant provisions on the pressure resistance of bags in GB / T 10004-2008 plastic composite films for packaging, dry compounding and extrusion compounding.4. Test equipment
In this paper, i-boxtek 1700 carton compression tester is used to test the pressure resistance of the sample. The equipment is independently developed and produced by Jinan Languang Electromechanical Technology Co., Ltd.4.1 test principleBy simulating the extrusion of the test sample stacking, apply a certain pressure on the sample, and test the deformation and leakage of the sample after it is maintained for a certain time under the applied pressure. In addition, the pressure value to be applied to the test sample can be set for many times by testing Zui large crushing force. Each setting is increased on the basis of the last force value. After reaching the predetermined number of times, the compressive capacity of the test sample such as the total deformation of the test sample can be tested.
4.2 equipment parametersThe test range of the equipment is 9kn; The test accuracy is better than level 1, which effectively ensures the accuracy of test data; Three test speeds can be freely set by users, namely 5 mm / min, 10 mm / min and 12.7 mm / min; The deformation resolution is 0.1mm; It has Zui large crushing force, stacking a and stacking B for users to choose freely; Intelligent design such as overload protection, limit travel protection and automatic fault alarm provides users with a safe operating environment; The miniaturization and structure integration design can meet the test requirements of various occasions.4.3 scope of application
(1) The equipment is applicable to the pressure resistance, deformation and stacking test of high-capacity liquid packaging, corrugated carton, honeycomb carton and other packaging, and judge whether the compression resistance of carton is qualified. At the same time, the compression test of plastic cups, plastic barrels (edible oil and mineral water), paper barrels, paper cans, container barrels (IBC barrels), hollow containers, etc.(2) The equipment meets a number of national and international standards, such as ASTM d642, ASTM d4169, TAPPI t804, ISO 12048, JIS z0212, GB / T 16491, GB / T 4857.4, QB / T 1048, etc.5. Test process
(1) Randomly select 5 finished product packaging samples with intact packaging.(2) Set test pressure, test speed, test time and other parameters.(3) Take one of the samples and put it between the two test plates of the equipment. Click the test option to start the test. After the test, the equipment displays the deformation of the sample.
(4) Put the other four samples between two test plates for test.6. Test resultsThe deformation of the five samples tested in this test under the pressure of 200 N for 1 min was 0.1 mm, 0.2 mm, 0.1 mm, 0.1 mm and 0.3 mm respectively. No air leakage or bag breakage occurred by visual inspection.
7. ConclusionPressure resistance is an important performance of inflatable food packaging. In this paper, i-boxtek 1700 carton pressure tester is used to detect the deformation of a brand of potato chips after the finished packaging is maintained under a certain pressure for a certain time, and visually detect the leakage and bag breakage of the sample. The test process is simple, the equipment is easy to operate and the test precision is high. To quantify the sealing performance of the sample after pressure test, put the sample after pressure test into mfy-01 sealing tester for test.
The retort pouch may be on the rebound. Heralded in the 1970s and 1980s as a packaging technology with outstanding applications potential to challenge metal cans and glass jars, retort pouches then experienced a period of stagnation. Retort pouches are filled with wet foods, sealed and then heat treated in steam/hot water retort kettles to achieve commercial sterilization (for shelf-stable foods) or pasteurization (for refrigerated foods). Certainly, you can find retort pouched products on grocery shelves (often as pouched meat and sauce components in boxed meal kits), but not in the vast varieties of foods predicted by early advocates. Some companies have opted for retortable rigid plastic bowls and cups versus the pouch for single-serving products. But now it seems food processors are beginning to revisit the concept of flexible retort pouch-packed, pre-cooked foods--especially for foodservice and club store markets. One company contributing to the retort pouch revival is Blue Star Food Products, Miami, which this spring launched six varieties of hand-picked crabmeat in 1-lb. retortable pouch packaging. The company uses its own modified, patent-pending process, retort pasteurizing the crabmeat (at about 170-200[degrees]F) rather than commercially sterilizing it (at about 250[degrees]F). The resulting product requires refrigeration, but has freshness, flavor and texture levels superior to traditional canned crabmeat, the company claims. Blue Star's reclosable zipper pouches are targeted mainly toward foodservice and club store markets. Users can portion out product and securely reclose the pouch, keeping the remainder fresh (refrigerated) for later use, Because processing time typically is faster in the pouch than in metal, glass or rigid plastic containers, the crabmeat tends to end up sweeter and moister. Pouches also offer lower shipping and storage costs (pouch material is lighter than cans, and pouches take up less storage space than cans); easier, safer handling (no can openers or thawing time required); reduced product waste (pouches easily can be completely evacuated of product); and reduced waste material compared to cans. Blue Star worked with Pyramid Flexible Packaging, La Habra, Calif., using the latter's Zip'n Store reclosable pouches, which are supplied in pre-made form. The three-side seal zipper pouch was created in alliance with Pyramid and Alcoa/Presto Products, Appleton, Wis. The zipper component of the packaging is constructed of specially engineered heat and pressure-sensitive resin, which enables the zippers 1o withstand high heat processing temperatures. This ability to use heat-tolerant zippers on retort pouches is a recent technology advance. "There is no question that reclosable zipper pouch packaging is more appealing to many of the main customers--chefs and kitchen workers--because it is so easy to use," says Steve Harmell, vice president of marketing and sales for Blue Star. "They can zip a pouch open and zip it closed again, putting what they don't need back in refrigeration for future use. This technology makes our product closer to fresh picked crabmeat versus standard canned/pasteurized crabmeat." Pouchburger Fully cooked ground beef packaged in retort pouches is an innovative venture being undertaken by Jack Link's Beef Jerky Co., Minong, Wis. The ground beef is filled in 10.6-oz volumes into retortable pouches, sealed and heat processed to an internal temperature of 2S0[degrees]F to accomplish commercial sterility and shelf stability. The convenient, time saving, no-mess product, currently in test markets in Wal-Mart stores, is intended for use in such applications as pizzas, pastas, tacos and casseroles. The processor also sees potential for marketing in sporting goods stores as a portable food for campers. To prepare the pouched ground beef, the user simply kneads the pouch to loosen the cooked ground beef, pours the contents in a heating bowl or pan, then microwaves it for about 30 to 45 seconds or stove top-heats the product. Initially, three flavor varieties are being offered: Lightly Seasoned, Italian Style and Mexican Style. The pouched ground beef has 12 months non-refrigerated shelf life if unopened. Interestingly, it's made at a new manufacturing facility in Sao Paulo, Brazil. "Since the test marketing began in October 2003, the product has been doing very well," says Cathy Sturm, senior marketing manager at Jack Link's. "But we realize consumer trial is very important, and there is a learning curve involved to educate consumers about the product features and availability." Spam explores singles scene Hormel Foods Corp., Austin, Minn., is considering giving consumers a new packaging option'or Spare, its popular processed meat product. The company is test marketing Spam Singles packaged in 3 oz foil/film retort pouches supplied by Kapak, Minneapolis. Preformed pouches are filled and sealed using equipment supplied by PPI (Profile Packaging Inc.) Technologies, Sarasota, Fla. Varieties available in the pouches are regular and oven-roasted turkey. Reportedly, the new packaging approach is doing very well in test markets. However, Hormel emphasizes that this retort pouch project is still in the test stage, and no final determination has yet been made about carrying it forward into full-scale production and marketing. Gerber babies the pouch A new line of meat based toddler foods is rolling out in stand-up, easy-open, retort pouch packaging. An addition to the Gerber Graduates line, Pasta Stuffers from Gerber Foods, Fremont, Mich., includes four initial varieties: Chicken & Parmesan Cheese, Turkey, Carrot & Wild Rice, Ham & Cheese, and Beef Pot Roast & Potato. Gerber packaging technologists are well-experienced in retort processes. The company has successfully used retorted metal cans and retorted rigid plastic bowls for various baby food products over the years. Pouch pros & cons When processors and packagers evaluate the potential of the retort pouch for their product applications, there are several considerations to weigh. On the pro side, pouch material is lightweight, and pouches are space efficient in terms of freight, storage and shelf display. These attributes can translate to significant shipping and storage savings, especially for large-volume operations. Pouches also offer an opportunit3, for striking, full-faced graphics presentations that can attract shopper attention and make a positive impact on sales. Furthermore, the reclosable zipper component now possible for retorted pouches adds an important convenience factor, especially for multi-portion packs used in the foodservice sector. Pouches are easily opened and quickly, easily evacuated of product, reducing costly product waste. And once the packages, are emptied, they can be flattened for disposal--offering considerable disposal space savings over metal cans, glass jars and rigid plastic containers. Finally, in some applications, the material cost of pouches may be less expensive than rigid plastic retortable containers. On the con side, retort pouches don't move through the recycle stream as well as metal cans do. There also are quality, control concerns such as pinholes, flex cracks and leaks in the flexible packaging material and seals.
Hi, foodie buddies! 👋 Today, I'll give you a super practical gadget - customized moisture-proof zipper food packaging bags! 🍪 Do you want fresh and crispy snacks? This baby will definitely make you unable to put it down!
Reusable, environmentally friendly and economical
Disposable packaging out! These bags can be reused, which is both environmentally friendly and cost-effective. After using them for a long time, their emotions will also deepen. 💖
Colorful and stylish online
Who says practicality cannot be balanced with aesthetics? These bags come in so many colors that they make people feel difficult to choose from, and they are also a beautiful scenery at home! 🌈
Super sealing and worry free moisture resistance
Using high-quality materials and double sealing design, air and moisture have nowhere to escape. You no longer have to worry about snacks becoming soft and affecting their taste! 🚫💧
Tear resistant and pressure resistant, sturdy and durable
Don't underestimate this small bag, it has an unimaginable load-bearing capacity. Even if a bear child randomly pulls and throws around, it will not be easily damaged.
no data
About Guide to Shop Aluminum Foil Bag for Food Packaging in Maixin
aluminum foil bag for food packaging delivered by Zhongshan Maixin Packing Technology, Ltd meets regulatory requirements. Its materials are sourced based on safe ingredients and their traceability. Quality targets and measures are specially established and strictly implemented to ensure its quality. With guaranteed performance and wide application, this product has a good commercial prospect.
Send your inquiry
you might like
no data
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
Ready to work with us ？
Copyright © 2024 Zhongshan Maixin Packing Technology, Ltd.-www.maixinpackingtech.com | Sitemap Privacy policy
